Biodiesel Kits And Processors

Heat is needed during the biodiesel conversion process for the following reasons:

1. Preheating your oil.
2. Heating your biodiesel during the settling process.
3. Drying water out of water-washed biodiesel.
4. Recovering methanol from biodiesel.

We have compiled a guide to heating systems here for you to be able to make a more informed decision on which system is best for you. 

The three main types of heating systems offered today are:

-Oil Preheating Systems.
-In-Line Heating Systems.
-In-Tank Heating Systems

Oil preheating systems are a safe traditional method of pre-heating the oil prior to processing. The system conists of a steel drum with at least one thermostat controlled barrel heater and insulation. This is a very safe method because there are no heating elements in contact with the liquid. The standard Freedom Fueler comes with this type of heating system.

In-Line Heating Systems

Better For:

– Pre-heating your oil.
– Drying water-washed biodiesel

Drawbacks:

– Requires a pump to operate.
– Cannot heat throughout entire process.
– Elements must be replaced periodically.

In-line heating systems are better than a pre-heating system but they have one common flaw, they all require a pump to circulate the oil through the heater in order for the heater to work. They are mainly intended to pre-heat the oil and dry the water out of biodiesel that has been water-washed. With an in-line heater using submerged elements, the user must remember to start the flow of liquid before turning the heater on.Note: All heaters have what is called a Watt Density. Watt density is the number of watts the heater puts out divided by the surface area of the heaters element. Our supplier of heating systems recommends no higher than 30 watts per square inch in the biodiesel process. All of our heaters have a watt density of 28 watts per square inch.

In-Tank Heating Systems

Best For:

– Preheating your oil.
– Heating biodiesel during settling.
– Drying water out of water-washed biodiesel.
– Removing methanol from dry-washed biodiesel.

An In-Tank Heating System is the ultimate in biodiesel heating systems, with the ability to maintain the batch temperature even if the temperature in your shop drops overnight. Home Biodiesel Kits is proud to offer the only In-Tank Heating System for home processors on the market. Each of our three Deluxe Biodiesel Processors now come with our new In-Tank Heating Systems. All three sizes come with sealed housings, a built in thermostat with high limit controls preset for the biodiesel process and an incoloy sheathed element to prevent corrosion. The entire unit is built into the top of the processor ensuring no leaks and a completely closed system. These heaters will allow you to heat your batch throughout the entire process and will maintain temperature with a built in sensor located in the center of the tank. Our custom heating units were designed and built specifically for our tanks and the biodiesel process with a watt density of 28. This is not an off the shelf product built for water or any other purpose but a professionally made heater manufactured by the leader in biodiesel heating systems. Call Jess or Ryan today to discuss our new In-Tank Heating Systems or to order one of our Deluxe Biodiesel Processors at 1-800-679-1398.If you want to read more about this on our blog click here to read about biodiesel .

Information on making your own biodiesel processor look here.

By: Boomer Sagacloud

Article Directory: http://www.articledashboard.com

Boomer Sagacloud is the editor for the websites Learn about Biodiesel highly recommended site,is committed to provide visitors with complete information on biodiesel related topics. Your feedback & comments will be highly appreciated.

Biodiesel Processor

A biodiesel processor is essentially a device that will convert vegetable oil into biodiesel. This biodiesel can then be used in any engine in which you would run diesel fuel. It’s cleaner than traditional diesel fuel and it is …   

Biodiesel – Biodiesel Processor

Biodiesel Home Biodiesel Vehicle Why a Biodiesel Car May be a Good Idea Buy a Biodiesel Car The Benefits Of A Biodiesel Car Benefits Of A Biodiesel Car A Biodiesel Jet Fighter Plane Biodiesel Processor How A Biodiesel Processor Can Save .

Students produced biodiesel, tested on school buses

Science teacher Bob Smith led the Magic Fuel Bus team of juniors and seniors Kelly Triplett, Ethan Hull, Nathan Maltba, Nou Yang, Mucheng Yang and Porter Yang to build a reactor processor to produce biodiesel fuel. 

Technorati Tags: Biodiesel, buld, home made, own, processor

Making Your Own Biodiesel

To make your own biodiesel you can go here!!

Home Biodiesel processors are very easy to assemble. Biodiesel processors can come from some materials which you can recycle from home or from some stuff from the junk yard:

Assembling the drum

1. Cut half of the top of the steel drum. Better if you can find a drum which doesn’t have the top anymore.

2. Prepare a hole for pipe attachment at the bottom of the drum. Do this by drilling a one and a half inch hole

3. Weld the pipe into the hole that you just drilled

4. Attach a brass ball valve which will serve as the drain control. Brass ball valves are more durable and are recommended for home made biodiesel processors.

5. Fit the heater element onto a hole that you will drill on the side of the drum. Heater elements can be purchased from your local hardware or be recycled from your old water heater

6. Wire the heater element properly

Chemical Mixer

1. Fasten one pulley to the mixer

2. Assemble the other pulley to the spindle of the motor

3. Weld the propellers to the end of the steel rod

4. Attach the mixer to the hinge so you can move it whenever needed

5. Weld the mixer assembly on the top of the drum using angled iron as support

6. Attach one side of the hinge to the angle iron to set the mixer in the middle of the drum

7. Tightly fit the belt to the pulleys by placing a block of wood into the hinge. The mixing capability is essential to Biodiesel processor to obtain good quality fuel.

8. Attach a measuring stick made of wood to know the quantity of the Biodiesel being produced

Here are some more pointers:

Biodiesel processors are just like big blenders. The rotors will mix the raw Biodiesel.

Biodiesel containers must be leak free. Instead of welding, industrial adhesives can be used to assemble Biodiesel processors. For portability, you can attach industrial wheels so you can move it from one place to another.

Remember the precautions to be observed during the production of Biodiesel. The process involves handling of hazardous chemicals before you can yield usable Biodiesel fuel.

For all the detail  information you can go here.

By: Jacky Tompson

Article Directory: http://www.articledashboard.com

For more information on biodiesel and biodiesel processors, visit our websit

Biodiesel Processor "How To"

How do you know you are really green? When you build your own bio diesel processor. That’s when you know you are extreme green. And here’s your chance. Only in the Bay Area, or at least we would like…  

Biodiesel Processors « biodiesel conversion kit

There are many different manufactures that will provide you and ship you a biodiesel processor. You can convert your regular vegetable oil into fuel with the help of biodiesel processors instead of using the costly traditional fuels. 

Making Biodiesel At Home? 

If your mindset is to produce more Biodiesel for the instance of running your automobile, you have to operate a Biodiesel processor. This simplifies the process, so you can mak fef e more than a few gallons at a time. 

BIODIESEL MACHINES FOR SALE – BioDieselNow – Renewable biodiesel fuel

We specialize in the exportation of Biodiesel oil but, we have 2 unit of compack bio pro biodiesel machine and 1 unit of the other in our stocks: compack bio pro biodiesel machine: compack bio diesel processor is for small units … 

Technorati Tags: Biodiesel, building, fuel, green, homemade, plans, processor, renewable, vegetable oil